RC4WD Trail Finder 2 "LWB" 1/10 RTR 4WD Scale Trail Truck w/Mojave II 4-Door Body & 2.4GHz Radio
- Brand:: RC4WD
- Product Code: RC4ZRTR0030
- Availability: In Stock
RC4WD Trail Finder 2 "LWB" 1/10 RTR 4WD Scale Trail Truck w/Mojave II 4-Door Body & 2.4GHz Radio
The TF2 LWB RTR has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2 LWB RTR. Performance of the TF2 LWB RTR is smooth and with its single speed transmission, 4WD drivetrain, bulletproof transfer case and quality metal components throughout. The TF2 LWB RTR is truly a work of art in both appearance and performance.
Specifications:
- Hammer Transfer Case
- Ratio: 1.47:1
- Gears: Wide .8 Mod Hardened Steel Gears
- Features: 8 Bearings, Cast Casing, Hardened Gears
- R3 Single Speed Transmission
- Ratios: Pinion/Spur 14/64 = 4.57:1
- Internal Ratio: 1.78:1
- Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch
-
Yota II Ultimate Scale Cast Axles
- Ratio: 15/40 = 2.67:1
- Width (Using 4mm TF2 Hexes): 176.5mm
- Trail Finder 2 Chassis
- Features: Billet Aluminum Constriction, Adjustable Shock Hoops
- Drive Shafts
- High Quality Plastic Material, Very Durable High Quality Steel Yokes
- Wheels
- Name: 1.55" OEM Beadlock Wheels
- Hub: 12mm Hex
- Width: 22mm
- Back Spacing: 9mm
- Features: Stamped Steel, Aluminum Hub, Internal Beadlock, Very Scale Looking, 6 Lug Design
- Bumpers
- Marlin Crawlers Rear Plastic Tube Bumper
- Marlin Crawlers Side Plastic Sliders
- Authentic Looking Crawler Style Bumper, High Quality Flexible Plastic, Extremely Durable, Very Scale
- TF2 Truck Dimensions
- Wheelbase: 12.36in/314mm
- Width: 8.46in/215mm
- Height: 8.27in/210mm
- Ground Clearance: 2.09in/53mm
Includes:
- (1) RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set
- (1) XR3 2.4Ghz Transmitter (Z-R0009)
- (1) Instruction Manual
Needed To Complete:
- Battery (Consult your "ESC" manual)
- Compatible Battery Charger
Notes:
- While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
- Use good quality hex drivers to avoid stripping screw heads.
- Use thread lock when putting metal screws into metal parts.
- Steps marked with an asterisk (*) require thread lock.
- Use thread lock sparingly.
- Do not over tighten screws otherwise you may strip the thread.
- Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1